Car tech accessories guide: dash cams, CarPlay and jump starters
Choose a dash cam, wireless CarPlay adapter, jump starter or OBD2 scanner with practical advice on compatibility, safety and used-market checks.

Updated October 14, 2026 · Sources last checked November 13, 2026
Our take
Buy a dash cam first if you want a record of incidents, prioritising dependable image quality and a properly powered parking mode. A wireless CarPlay adapter is the easiest upgrade only when the car already has wired CarPlay; otherwise, consider a portable screen or stereo change.
A jump starter suits drivers who travel far or own a car with an ageing battery, while an OBD2 scanner is most useful for warning-light checks and used-car inspections. With pre-owned accessories, exact model identity, working cables, battery condition and firmware support matter as much as the headline specification.
Choose the job before the gadget
These products solve separate problems. A dash cam preserves video evidence, CarPlay hardware improves phone access through the car’s display, a jump starter supplies emergency starting power, and an OBD2 scanner helps investigate vehicle faults.
Start with the car rather than the accessory. Check its model year, infotainment system, USB socket and phone platform. For a used listing, ask for the exact model number, photographs of the label, all proprietary cables and proof that the device powers on. A low price is not useful if the unit cannot connect to your vehicle or needs an unavailable app.
Dash cams reward balanced image quality
Resolution matters, but it is not the whole picture. Garmin’s documentation for the exact Dash Cam 57 and 67W lists 1440p recording at 30 frames per second with HDR, alongside a 1080p 60fps option. HDR is valuable in difficult contrast, such as headlights against a dark road; higher resolution can preserve more distant detail, but it also increases storage demands.
Field of view is a trade-off. Garmin lists the exact 67W at 180 degrees and the 57 at 140 degrees. A broader view can include more of an intersection, but extreme width may make distant plates and signs appear smaller. For most buyers, a well-mounted camera with credible night footage, sensible HDR and a clean view through the windscreen is preferable to a model chosen only for its largest pixel count.
GPS can attach location and speed information to clips, while Wi-Fi or an app can make footage easier to move to a phone. Storage deserves equal attention: Garmin says these cameras overwrite the oldest unsaved footage when the card fills and recommends formatting the card at least every six months. A used camera should therefore come with a serviceable card, or you should budget for a replacement that meets the exact model’s requirements.
| Feature | Why it matters | What to check |
|---|---|---|
| 1080p or 1440p | Can preserve useful scene detail | Exact frame rate, HDR support and footage from the same model |
| Wide field of view | Records more surrounding context | Whether distant objects remain large enough to identify |
| GPS | Adds location and speed context | Whether it is built in or requires a special mount |
| Wi-Fi or app | Simplifies clip transfer | App availability, firmware support and account requirements |
| Rear or cabin camera | Adds evidence behind or inside the car | Cable routing, night performance and privacy implications |
Parking mode needs a suitable power source
Parking mode is a power and recording system, not merely a menu toggle. Garmin describes Parking Guard as incident-triggered recording while the vehicle is parked, with settings for impact sensitivity and monitoring time. Its manual says the pre-incident recording option needs an external power source, so buyers should check whether the installation requires a hardwire kit, constant-power cable or another approved supply.
The recording behaviour also varies. Some cameras react to an impact; others can respond to motion or preserve a short buffer before an event. Garmin’s manual allows recording before an incident and says the camera can run Parking Guard from its own battery when no external source is connected, but that is a limited arrangement rather than a substitute for a properly installed parking-power system.
Use the maker’s wiring method and battery-protection settings. A camera left monitoring for long periods can create problems if the vehicle battery is already weak. Privacy rules also vary: Garmin warns that Parking Guard is not available in every area and that in-car audio may require notice or consent. Check local law before recording conversations or aiming a camera at private property.
Wireless CarPlay is a compatibility purchase
The first question is whether the car already supports wired CarPlay or Android Auto. Road & Track’s 2026 guide explains that compact adapters connect to the vehicle’s USB data port, then use Bluetooth and Wi-Fi to connect the phone. They are bridges between an existing compatible head unit and a phone, not replacements for the display or a way to create CarPlay in a car that lacks smartphone integration.
For an iPhone-only car, a small CarPlay adapter is usually the simplest route. A household using both phone platforms should choose a device that explicitly supports both systems and offers a practical way to switch drivers. Road & Track also distinguishes basic adapters from Android-based boxes that add their own interface, apps or split-screen functions. Those products can do more, but they add another layer of compatibility and connectivity to verify.
Do not confuse a dongle with a portable CarPlay screen. Road & Track describes portable screens as a route for older cars without built-in smartphone integration, because the screen supplies the display itself. For a pre-owned adapter, check the update method, supplied USB-A or USB-C cables, phone support and the seller’s return terms if the car’s head unit refuses to connect.
- Verify that the car has wired CarPlay or Android Auto before buying a plug-in adapter.
- Match the device to the phones that will actually be used and to the vehicle’s USB data port.
- Treat streaming apps and Android-based interfaces as extras, not evidence of basic compatibility.
Jump starters need honest ratings and safe batteries
Peak-amp figures are only useful alongside the voltage and manufacturer’s engine guidance. NOCO’s exact GB40 is a 12V lithium-ion jump-starter pack with a 1,000-amp rating; NOCO gives separate limits of 6.0 litres for gasoline engines and 3.0 litres for diesel engines. It also lists spark-proof connection and reverse-polarity protection, which are sensible priorities when a roadside connection may be rushed.
Choose enough margin for the vehicle rather than matching the smallest possible rating. Check clamp reach, cable condition, charging method and whether the pack can also recharge USB devices. A light is convenient at night, but it should come after the essentials: correct voltage, an appropriate engine rating, intact clamps and a battery pack that still accepts and holds a charge.
Inspect a used lithium jump starter for swelling, cracks, heat damage, corrosion or charging failure. The CPSC warned on September 17, 2026, that Hererod PW40 and EW40 jump starters and power banks could ignite or explode; it advises stopping use and following local hazardous-waste guidance rather than putting a defective unit in household rubbish. The CPSC also records an older Whistler Jump&Go recall, so check the precise model and date code before buying second-hand.
OBD2 scanners are clues, not verdicts
An OBD2 scanner can read and clear a check-engine light and provide real-time monitoring, as OBDLink documents for its MX+. A basic reader may be enough to investigate a warning light, but a scan is only one part of assessing a used vehicle.
OBDLink’s exact MX+ illustrates why specifications matter. Its manufacturer lists iOS, Android and Windows support, SW-CAN and MS-CAN support, automatic sleep and wake-up, BatterySaver low-power operation and free firmware updates. Those features can matter in a used vehicle: an adapter left connected should not become a battery drain. Coverage beyond standard engine diagnostics varies, so check the exact vehicle and app requirements before buying.
For a pre-purchase inspection, use the scan as buyer evidence rather than a final verdict. Save the results before changing anything, compare warning lights with the seller’s explanation and treat a clean screen as limited reassurance. Treat a scan as one piece of evidence and arrange a broader mechanical inspection when the purchase matters.
Use the listing as a condition report
Manufacturer support pages are especially useful with older accessories because apps, card limits, cables and firmware can differ between similar-looking versions. Compare the exact model suffix with the maker’s documentation, and ask for a label photograph when the listing is vague. Avoid damaged lithium batteries, missing proprietary leads and descriptions that cannot establish the model.
- Dash cam: verify resolution, HDR, field of view, night footage, card support and parking-power requirements.
- CarPlay adapter: confirm existing wired CarPlay, phone-platform support, USB data compatibility and update support.
- Jump starter: match voltage and engine guidance; inspect the battery, clamps, casing and recall status.
- OBD2 scanner: check vehicle coverage, phone compatibility, protocol support, sleep mode and whether enhanced data needs a paid app.
- Any used accessory: confirm the exact model, included cables, physical condition and a workable return path.
Sources
- Garmin model comparison support page
- Garmin Dash Cam 47/57/67W Owner’s Manual
- Road & Track wireless CarPlay adapter guide
- NOCO GB40 manufacturer page
- OBDLink MX+ manufacturer page
- CPSC Hererod jump starter safety warning
- CPSC Whistler Jump&Go recall
Specifications vary by model and reference — always check the individual listing.
